MikeCheck
15-01-2008, 07:45 PM
Item:
Coolermaster CAC-T05 (aka: Centurion 5)
Condition:
Heavily modded (in SOME places ghetto-ly so)
Price:
$60.00
StaticIce has them at 67 bucks new... but that's without all the mods.
Description:
List of mods:
- Window put into side.
- Fan grill cut out at the back.
- 120mm blowhole put in.
- Front 80mm converted to accept 120mm
- Hard drive cage removed to accept 120mm fan. Hard drives are now suspended via elastic in the 5.25" bays or via a home-made (also elastic suspension) cradle.
- Holes cut in motherboard tray for cable routing. 24-pin and 4-pin holes as well as an IDE/SATA and case wires.
http://i60.photobucket.com/albums/h12/Mike_Check/PICT1203.jpg
Shows the cuts into the motherboard tray for better cable routing. Have since cleaned up and are no longer ghetto.
http://i60.photobucket.com/albums/h12/Mike_Check/PICT1200.jpg
Shows the front 120mm. Has since been properly mounted (ie with screws; NOT with blu-tac) and no longer has the stamped out grill (the grey interior one is gone NOT the outer black mesh)
http://i60.photobucket.com/albums/h12/Mike_Check/PICT1198.jpg
Shows blowhole. It's not changed.
http://i60.photobucket.com/albums/h12/Mike_Check/PICT1196.jpg
Shows window. It also has not changed; still see-through.
Thanks for looking.
Mike.
Coolermaster CAC-T05 (aka: Centurion 5)
Condition:
Heavily modded (in SOME places ghetto-ly so)
Price:
$60.00
StaticIce has them at 67 bucks new... but that's without all the mods.
Description:
List of mods:
- Window put into side.
- Fan grill cut out at the back.
- 120mm blowhole put in.
- Front 80mm converted to accept 120mm
- Hard drive cage removed to accept 120mm fan. Hard drives are now suspended via elastic in the 5.25" bays or via a home-made (also elastic suspension) cradle.
- Holes cut in motherboard tray for cable routing. 24-pin and 4-pin holes as well as an IDE/SATA and case wires.
http://i60.photobucket.com/albums/h12/Mike_Check/PICT1203.jpg
Shows the cuts into the motherboard tray for better cable routing. Have since cleaned up and are no longer ghetto.
http://i60.photobucket.com/albums/h12/Mike_Check/PICT1200.jpg
Shows the front 120mm. Has since been properly mounted (ie with screws; NOT with blu-tac) and no longer has the stamped out grill (the grey interior one is gone NOT the outer black mesh)
http://i60.photobucket.com/albums/h12/Mike_Check/PICT1198.jpg
Shows blowhole. It's not changed.
http://i60.photobucket.com/albums/h12/Mike_Check/PICT1196.jpg
Shows window. It also has not changed; still see-through.
Thanks for looking.
Mike.